Stay Connected:

SOGEC

REQUEST
A CALL BACK
Have any questions or concerns? Don't hesitate to contact us.
Call (+966) 12 627-8444

SOGEC

Specialized Oil & Gas Engineering Co. Ltd.

SOGEC was initially launched in 2001 as a part of Kabbani Construction Group to meet the acute needs of Cathodic Protection (CP), Non-Destructive Testing (NDT) & Heat Treatment (HT) required by the oil & gas industry, through the vast experience gained by the division’s engineering and technical staff. 

SOGEC is a 100% Saudi National Company registered with the Ministry of Commerce under Commercial Registration No. 4030133192. SOGEC has acquired extensive professional experience in the field of Cathodic Protection, Non-Destructive Testing & Heat Treatment for pipelines, plant piping, tanks, vessels, jetties, steel-reinforced concrete, etc.

SOGEC is a registered vendor with the following well-reputed end clients: 

  • Saudi Oil Company-Saudi ARAMCO 
  • Saudi Basic Industries Corporation (SABIC) 
  • Saudi Electricity Company (SEC) 
  • Royal Commission (RC) 
  • Ministry of Water Saline Water Conversion Company (SWCC) 
  • MARAFIQ 
  • National Water Company (NWC) 
  • PetroRabigh 
  • Bahrain Petroleum Company (BAPCO ) 
  • Kuwait Oil Company ( KOC ) 
  • Kuwait National Petroleum Company ( KNPC ) 
  • Advance Building Technologies Company (ADCO) 

SOGEC's Services Includes:

SOGEC is proud to present to its respectful clients the following services:

CATHODIC
PROTECTION
INTERNAL
CORROSION
PIPELINE DIRECT
ASSESSMENT
VCI
SERVICES
NON-DESTRUCTIVE
TESTING
HEAT
TREATMENT
INSPECTION
SERVICES

Our Services

Cathodic Protection

Cathodic Protection Services Whether the project is a pipeline, tank, offshore or concrete structure, SOGEC will design the right, economical, and most efficient Cathodic Protection (CP) System to protect the structure with the minimum required maintenance. 

  • · Pre-Design & Site Survey of the Cathodic Protection System 
  • · Cathodic Protection System Design 
  • · Manufacturing & Supply of Cathodic Protection Materials 
  • · Installation of Cathodic Protection Systems 
  • · Testing, Commissioning & Monitoring of Cathodic Protection Systems 
  • · Over-the-line Surveys 
  • · AC Interference Mitigation Systems 

Internal Corrosion

Alongside external corrosion services, SOGEC is evolving in the Internal Corrosion field and is currently capable of developing sound Corrosion Management Programs and provides Corrosion Monitoring Services starting with an online coupon and probe retrieval thru corrosion analysis at our well-established in-house laboratory into data logging and remote monitoring. 

Pipeline Direct Assessment

Despite the presence of various inline inspection tools still, the need for a proactive inspection technique exists. Pipeline Direct Assessment is a NACE well-structured program that helps anticipate where corrosion might happen, it identifies and categorizes threats over pipelines, and helps manage and prioritize mitigation and repair actions. SOGEC provides the three types of Direct Assessment, ECDA, ICDA, and SSCDA with a high level of knowledge and experience. 

VCI Services

SOGEC / Zerust Oil & Gas Tank SSB Inhibitor Delivery System (IDS) solutions provide a cost-effective means to mitigate underside corrosion of aboveground storage tanks while the tanks are in or out of service. Whether tank bottoms, single or double, rest on compacted sand, concrete, soil, or bitumen, our solution extends the serviceable life of assets. 

  • · Chime Ring Dry 
  • · Chime Ring Injection 
  • · Underside Injection 
  • · Underside Drip Tube 
  • · Dry Tube 
  • · Internal Flood 
  • · Inhibitor IDS System benefits 
  • · Solution Effectiveness 

Non-Destructive Testing

NDT services encompass a wide range of Inspection, Quality Assurance, and Quality Control offerings operating within the guidelines of our ISO 9001:2000 Quality Program. All in-house and field services are supported by our highly experienced management and engineering team, dedicated to customer service. In addition to traditional NDT, 

SOGEC also delivers specific advanced NDT techniques, including:

· ASNT Level III Consulting Services 

· Radiographic Testing – RT 

· Ultrasonic Thickness Gauge Testing – UTT 

· Ultrasonic Shear Wave Testing – UT 

· Leak Detection

· Dye Penetrant Testing -DPT 

· Phase Array Ultrasonic Testing – PAUT 

· Visual Inspection 

· Magnetic Particle Testing – MPT. 

· TOFD 

· In-situ Metallography 

· Internal Rotary Inspection System (IRIS) 

· Magnetic Flux Leakage (MFL) 

Heat Treatment

SOGEC has the capacity in the region to control over 2700 KW of applied heat; this is divided into 55 sets of conventional low voltage type equipment and 2 sets of 380-volt control equipment (as used on the heat treatment of large pressure vessels and temporary applications). Also, available for use is SOGEC Gas / Oil Firing Equipment having high-velocity burners suitable for spheres tanks, vessels, and furnaces. Other applications include refractory curing and dry outs, tapping and draining of furnaces, regenerator melts, and cullet filling for the glass industry. Our Dammam and Jubail workshop facility holds the bulk of our contract equipment. It also houses our controlled environment calibration workshop, schoolroom, repair workshop, and manufacturing department.

  • · Post Weld Heat Treatment – PWHT
  • · Pre-Heating
  • · Solution Annealing
  • · Normalizing
  • · Furnaces
  • · Hardness Testing
  • · Positive Material Identification – PMI
  • · Refractory Dry-Out
  • · Stress Relieving
  • · Internal Firing

Inspection Services

SOGEC can provide third-party inspection services in the Kingdom of Saudi Arabia and Bahrain in accordance with international codes, standards, and specifications. SOGEC can provide Independent Third Party Inspection and Quality Assurance Services. This includes inspection of pressure vessels, pipelines, and raw materials, initial production check, in-production check, random inspection, and loading supervision directly on-site at a given vendor/supplier location in Saudi Arabia.

  • · PQR Qualification
  • · WQT Witnessing
  • · API Inspection

Our Clients

 
 

Contact Us

Dammam Branch

P.O. Box 6897 Dammam 31452, Saudi Arabia 

Tel: +966 13 892 3777 

Fax: +966 13 814 4849 

Riyadh Branch

P.O. Box: 58951 Riyadh 11515, Saudi Arabia 

Tel.: +966 11 292 8363 

Fax: +966 11 473 2396 

Jeddah Branch

P.O. Box 6897 Jeddah 21422, Saudi Arabia 

Tel.: +966 126278363 

Fax: +966 114732396 

Get In Touch

Use the contact form below or e-mail us at sogeccp.dammam@ikkgroup.com (for Cathodic Protection-related requests) or sogecndt.dammam@ikkgroup.com (for NDT-related requests) to get in touch with us.

    Looking For Specialized Contracting Services?
    We offer various specialized engineering services through our 16 companies, ranging from waterproofing to fireproofing to concrete repair to steel fabrication.